Floor-to-ceiling tension cat tree S-9

Floor-to-ceiling tension cat tree S-9

The Floor-to-ceiling tension cat tree S-9 is an extensive upholstered structure that uses the space between the floor and ceiling. Its arrangement of numerous scratching posts, several shelves, a cat box, a swing and two tubes creates a multi-level route for scratching, climbing, resting and observing the surroundings.

The longest post measures 100 cm and provides the cat with a long vertical surface for claw care and full-body stretching. The remaining posts, measuring 57, 40, 35 and 30 cm, connect the different sections and can also be used for scratching while climbing. All posts have a diameter of 12 cm.

The model includes several upholstered shelves. The 40 × 50 cm side shelf creates an additional step and an open sitting place. The 45 × 140 cm shelf with an opening forms the main level of the structure, while the 40 × 96 cm shelf and two 40 × 55 cm shelves provide further places for moving, resting and observing the room.

The cat box measures 40 × 40 cm and is 30 cm high. It is upholstered on the outside and provides a more sheltered space for sleeping and peaceful rest. Its position in the central section also creates an intermediate stop when moving between levels.

A 25 × 25 cm swing is suspended beneath the shelf with an opening. Its hanging design adds variety to the structure and provides an additional place for playing or short periods of rest.

The structure also includes two tubes, each measuring 40 cm in length and 30 cm in diameter. They can be used as sheltered places for resting, passing through or observing the room from a higher position.

The 50 × 120 cm base is made of layered plywood. Its elongated shape corresponds to the wide, multi-column layout and provides the space required for the arrangement of the lower posts.

The upper section of the S-9 model is fitted with two tension mechanisms that press against the ceiling. The height of the cat tree is adjusted to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and both ceiling tension mechanisms adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour.

Technical specifications of the S-9 cat tree

• total height: adjusted to the room height provided when ordering;

• base: 50 × 120 cm, made of layered plywood;

• side shelf: 40 × 50 cm;

• cat box: 40 × 40 cm, height 30 cm, upholstered on the outside;

• swing: 25 × 25 cm;

• shelf with an opening: 45 × 140 cm;

• shelf: 40 × 96 cm;

• 2 × shelf: 40 × 55 cm;

• 2 × tube: length 40 cm, diameter 30 cm;

• post diameter: Ø 12 cm;

• posts:

  • 1 × 100 cm;

  • 1 × 57 cm;

  • 5 × 40 cm;

  • 2 × 35 cm;

  • 1 × 30 cm;

  • 2 × 30 cm with tension mechanisms;

• 2 × tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-9 is an extensive upholstered floor-to-ceiling cat tree that combines numerous scratching surfaces with shelves, a cat box, a swing and two tubes. Its multi-level layout makes use of vertical space and provides several climbing routes and varied resting places.