Floor-to-ceiling tension cat tree S-8

Floor-to-ceiling tension cat tree S-8

The Floor-to-ceiling tension cat tree S-8 is an extensive upholstered structure that uses the space between the floor and ceiling. Its arrangement of scratching posts, two round cat boxes, a shelf, a hammock and a lair with a rosette creates a multi-level route for scratching, climbing, observing the surroundings and resting at different heights.

The lower section includes four posts with a diameter of 14 cm. Two 60 cm posts provide long vertical surfaces for claw care and full-body stretching. The structure also includes 40 and 17 cm posts that connect the base with the next levels.

The upper section contains five posts with a diameter of 12 cm: two 39 cm posts, two 23 cm posts and one 30 cm post connected to the ceiling tension mechanism. Their varied lengths create a gradual route leading to the highest resting areas.

The round shelf has a diameter of 40 cm and provides an additional step and open sitting area. It helps the cat begin climbing and move between the lower section and the equipment positioned higher in the structure.

The model includes two round cat boxes. The larger cat box has a diameter of 50 cm and a height of 40 cm, while the smaller one has a diameter of 40 cm and a height of 35 cm. Both are upholstered inside and provide sheltered places for sleeping and peaceful rest.

The single hammock measures 50 × 62 cm and creates a soft, open resting place. Its surface adapts to the cat’s body, while its position in the upper section allows the cat to rest and observe the room from an elevated position.

The cat tree is completed by a lair with a rosette measuring 50 cm in diameter. Its raised edges create a partially sheltered bed that can serve as the highest resting area and observation point.

The round base has a diameter of 70 cm and is made of layered plywood. Its shape corresponds to the multi-column arrangement, which provides several levels and a variety of resting places.

The upper section of the S-8 model is fitted with a tension mechanism that presses against the ceiling. The height of the cat tree is adjusted to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the ceiling tension mechanism adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour.

Technical specifications of the S-8 cat tree

• total height: adjusted to the room height provided when ordering;

• round base: diameter 70 cm, made of layered plywood;

• round shelf: diameter 40 cm;

• lair with a rosette: diameter 50 cm;

• single hammock: 50 × 62 cm;

• round cat box: diameter 50 cm, height 40 cm, upholstered inside;

• round cat box: diameter 40 cm, height 35 cm, upholstered inside;

• Ø 14 cm posts:

  • 2 × 60 cm;

  • 1 × 40 cm;

  • 1 × 17 cm;

• Ø 12 cm posts:

  • 2 × 39 cm;

  • 2 × 23 cm;

  • 1 × 30 cm with tension mechanism;

• tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-8 is an upholstered floor-to-ceiling cat tree that combines numerous scratching surfaces with two sheltered cat boxes, a shelf, a hammock and a spacious lair with a rosette. Its multi-level layout uses the room height and provides several places for climbing and resting.