Floor-to-ceiling tension cat tree S-7

Floor-to-ceiling tension cat tree S-7

The Floor-to-ceiling tension cat tree S-7 is an extensive upholstered structure that uses the space between the floor and ceiling. Its arrangement of scratching posts, a cat box, a hammock, shelves, a Gutter bed and a tube creates a multi-level route for scratching, climbing, observing the surroundings and resting at different heights.

The longest post measures 100 cm and provides the cat with a long vertical surface for claw care and full-body stretching. The remaining posts, measuring 70, 63, 45, 40, 35 and 30 cm, connect the different levels and can also be used for scratching while climbing. All posts have a diameter of 12 cm.

A round cat box with a diameter of 40 cm and a height of 35 cm is located in the lower section. It provides a more sheltered place for sleeping and peaceful rest, while its position creates one of the first levels along the vertical route.

The single hammock measures 50 × 62 cm and provides a soft, open resting place. Its position in the middle section allows the cat to relax and observe the room from an elevated position.

The 45 × 70 cm shelf creates a spacious level that makes it easier to move between the different sections of the cat tree. It is combined with a Gutter bed measuring 70 cm in length, whose curved shape provides a partially sheltered resting surface.

The structure also includes a 40 × 45 cm side shelf and a 40 × 55 cm upper bed. These elements provide additional places for sitting, resting and changing direction while climbing.

A tube measuring 40 cm in length and 30 cm in diameter is located in the upper section. It can be used as a sheltered resting place, passage or observation point. The structure also includes a small round platform with a diameter of 18 cm.

The 80 × 55 cm base is made of layered plywood. Its elongated shape corresponds to the extensive arrangement of scratching posts and resting areas.

The upper section of the S-7 model is fitted with a tension mechanism that presses against the ceiling. The height of the cat tree is adjusted to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the ceiling tension mechanism adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour.

Technical specifications of the S-7 cat tree

• total height: adjusted to the room height provided when ordering;

• base: 80 × 55 cm, made of layered plywood;

• round cat box: diameter 40 cm, height 35 cm;

• single hammock: 50 × 62 cm;

• shelf: 45 × 70 cm;

• Gutter bed: length 70 cm;

• side shelf: 40 × 45 cm;

• upper bed: 40 × 55 cm;

• tube: length 40 cm, diameter 30 cm;

• small round platform: diameter 18 cm;

• post diameter: Ø 12 cm;

• posts:

  • 1 × 100 cm;

  • 1 × 70 cm;

  • 1 × 63 cm;

  • 2 × 45 cm;

  • 1 × 40 cm;

  • 1 × 35 cm;

  • 2 × 30 cm, including one with the tension mechanism;

• tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-7 is an upholstered floor-to-ceiling cat tree that combines numerous scratching surfaces with a cat box, hammock, shelves, a Gutter bed and a tube. Its multi-level layout uses the room height and provides varied places for climbing and resting.