Floor-to-ceiling tension cat tree S-4

Floor-to-ceiling tension cat tree S-4

The Floor-to-ceiling tension cat tree S-4 is an extensive upholstered structure that uses the space between the floor and ceiling. Its combination of scratching posts, a round cat box, a hammock, a tube, a swing and several shelves creates a multi-level route for climbing, resting and observing the surroundings.

The model is equipped with eight posts measuring 12 cm in diameter. The longest post measures 80 cm and provides the cat with a long vertical surface for claw care and full-body stretching. The 49 cm post and five 40 cm posts connect the different levels and can also be used for scratching while climbing. The upper 30 cm post is connected to the ceiling tension mechanism.

A 40 × 50 cm side shelf is located in the lower section. It creates an additional step that makes it easier to move between the base and the elements positioned higher in the structure. It also provides an open place for sitting and observing the room.

The round cat box has a diameter of 40 cm and a height of 35 cm. It is also upholstered inside, providing a sheltered space for sleeping and peaceful rest. Its position in the middle section allows the cat to use the hideaway at an elevated level.

The 40 × 55 cm shelf with an opening makes it easier to move between the different sections of the cat tree. A 25 × 25 cm swing is suspended beneath the shelf, adding variety to the structure and providing an additional place for playing or short periods of rest.

Another 40 × 50 cm shelf is combined with a tube measuring 40 cm in length and 30 cm in diameter. The tube can be used as a sheltered place for resting, passing through or observing the room from a higher position.

The single hammock measures 50 × 62 cm and provides a soft, open resting place. It is positioned in the upper section, allowing the cat to relax and observe the surroundings from one of the highest levels of the cat tree.

The 50 × 80 cm base is made of layered plywood. Its elongated shape corresponds to the multi-column arrangement and the distribution of the resting elements.

The upper section of the S-4 model is fitted with a tension mechanism that presses against the ceiling. The height of the cat tree is adjusted to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the ceiling tension mechanism adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour.

Technical specifications of the S-4 cat tree

• total height: adjusted to the room height provided when ordering;

• base: 50 × 80 cm, made of layered plywood;

• side shelf: 40 × 50 cm;

• round cat box: diameter 40 cm, height 35 cm, also upholstered inside;

• shelf with an opening: 40 × 55 cm;

• swing: 25 × 25 cm;

• shelf: 40 × 50 cm;

• tube: length 40 cm, diameter 30 cm;

• single hammock: 50 × 62 cm;

• post diameter: Ø 12 cm;

• posts:

  • 1 × 80 cm;

  • 1 × 49 cm;

  • 5 × 40 cm;

  • 1 × 30 cm with tension mechanism;

• tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-4 is an upholstered floor-to-ceiling cat tree that combines numerous scratching surfaces with a cat box, hammock, tube, swing and shelves. Its multi-level structure uses the room height and provides varied places for climbing, playing and resting.