Floor-to-ceiling tension cat tree S-1G

Floor-to-ceiling tension cat tree S-1G

The Floor-to-ceiling tension cat tree S-1G is a tall, upholstered structure that uses the space between the floor and ceiling. Its arrangement of scratching posts, two round cat boxes and two single hammocks creates a vertical route for scratching, climbing and resting at different heights.

The longest post measures 80 cm and provides the cat with a long vertical surface for claw care and full-body stretching. The shorter posts, measuring 30 and 20 cm, connect the different levels and can also be used for scratching while climbing. All posts have a diameter of 14 cm.

The model is equipped with two round cat boxes with diameters of 45 and 40 cm. They provide sheltered spaces for sleeping and peaceful rest. Their placement at different levels allows the cat to choose its preferred height and creates intermediate stops along the climbing route.

Two single hammocks are located in the upper section of the cat tree. Their soft surfaces adapt to the cat’s body and provide additional resting places. The hammocks are positioned one above the other, encouraging the cat to climb and use the higher levels.

The 50 × 65 cm base is made of layered plywood. Its elongated shape matches the arrangement of the two lower sections, while the vertical layout provides several resting places without requiring the floor space of a wide freestanding cat tree.

The upper section of the S-1G model is fitted with a tension mechanism that presses against the ceiling. The cat tree is made according to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the tension mechanism adjusted correctly. During use, it is advisable to check the connections and the contact between the upper element and the ceiling periodically.

The model can be configured by selecting the available upholstery type and rope colour. This makes it possible to match the upholstered floor-to-ceiling cat tree to the interior.

Technical specifications of the S-1G cat tree

• total height: adjusted to the room height provided when ordering;

• base: 50 × 65 cm, made of layered plywood;

• round cat box: diameter 45 cm;

• round cat box: diameter 40 cm;

• 2 × single hammock;

• post diameter: Ø 14 cm;

• posts:

  • 1 × 80 cm;

  • 3 × 30 cm;

  • 1 × 20 cm;

  • 1 × 30 cm with tension mechanism;

• tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-1G is an upholstered floor-to-ceiling cat tree that combines long scratching surfaces with two sheltered cat boxes and two hammocks. Its vertical layout makes use of the room height and provides several places for climbing and resting.