Floor-to-ceiling tension cat tree S-1B

Floor-to-ceiling tension cat tree S-1B

The Floor-to-ceiling tension cat tree S-1B is a tall, upholstered structure that uses the space between the floor and ceiling. Its arrangement of scratching posts, three single hammocks and a rosette lair creates a vertical route for scratching, climbing and resting at different heights. 

The longest post measures 100 cm, providing the cat with a long surface for claw care and full-body stretching. The structure also includes two 37 cm posts, one 40 cm post and one 30 cm post connected to the ceiling tension mechanism. All posts have a diameter of 14 cm. 

The model is equipped with three single hammocks with frames, positioned one above another. Their soft surfaces adapt to the cat’s body and provide several open places for resting and observing the room. The gradual arrangement also encourages climbing and using the higher sections of the cat tree. 

A rosette lair with a diameter of 45 cm is located in the lower section. Its raised edges create an open, partially sheltered resting place that can also serve as an intermediate stop when moving between levels. 

The 50 × 65 cm base is made of layered plywood. Its elongated shape corresponds to the arrangement of the lower posts, while the vertical layout provides several resting places without requiring the floor space of a wide freestanding cat tree.

The upper section of the S-1B model is fitted with a tension mechanism that presses against the ceiling. The cat tree is made according to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location. 

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the ceiling tension mechanism adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour. 

Technical specifications of the S-1B cat tree

• total height: adjusted to the room height provided when ordering;
• base: 50 × 65 cm, made of layered plywood;
• 3 × single hammock with frame;
• rosette lair: diameter 45 cm;
• post diameter: Ø 14 cm;
• posts:
  • 1 × 100 cm;
  • 2 × 37 cm;
  • 1 × 40 cm;
  • 1 × 30 cm with tension mechanism;
• tension mechanism for ceiling installation;
• choice of upholstery type and rope colour. 

S-1B is an upholstered floor-to-ceiling cat tree that combines long scratching surfaces with three single hammocks and a rosette lair. Its vertical layout makes use of the room height and provides several places for climbing, observing the surroundings and resting.