Floor-to-Ceiling Tension Cat Tree EX-S-1A

Floor-to-Ceiling Tension Cat Tree EX-S-1A

The Floor-to-Ceiling Tension Cat Tree EX-S-1A is a tall model designed for installation between the floor and ceiling. Its slim, vertical construction makes efficient use of the room height and provides the cat with several levels for scratching, climbing, resting and observing the surroundings.

Technical specifications – EX-S-1A

• overall height: adjusted to the room height provided when placing the order;
• base: 50 × 50 cm, 36 mm thick, made of layered plywood;
• 2 × single hammock with removable cover;
• 1 × Lair ‘Paddle’: Ø51 cm, with removable cushion;
• post diameter: Ø14 cm;
• posts:
• 1 × 100 cm;
• 2 × 45 cm;
• 1 × 30 cm with ceiling tension mechanism;
• ceiling tension mechanism;
• choice of finish according to the options available on the product page.

The EX-S-1A floor-to-ceiling cat tree is stabilised with a ceiling tension mechanism. The overall height of the structure is adjusted to the room height provided when placing the order. Before purchasing, carefully measure the distance from the finished floor to the ceiling at the exact location where the cat tree will be installed.

After assembly, check that the cat tree is positioned vertically, tighten all connections securely and adjust the ceiling tension mechanism correctly. The finish can be selected from the options available on the product page.