Floor-to-Ceiling Tension Cat Tree EX-S-12

Floor-to-Ceiling Tension Cat Tree EX-S-12

The Floor-to-Ceiling Tension Cat Tree EX-S-12 is an expanded model designed for installation between the floor and ceiling. Its vertical construction makes efficient use of the room height, providing the cat with several levels for climbing, scratching, resting and observing the surroundings.

Technical specifications – EX-S-12

• overall height: adjusted to the room height provided when placing the order;
• base: 50 × 70 cm, 45 mm thick, made of layered plywood;
• 1 × single hammock with layered plywood frame and removable washable cover;
• 1 × double hammock with layered plywood frame and removable washable cover;
• 2 × cat house: inner diameter Ø45 cm, height 35 cm;
• 1 × cat house with two ears;
• outer surfaces of the cat houses covered with a white sisal mat;
• wax-treated cat house interiors;
• removable cushions inside and on top of the cat houses;
• cat house panels made of layered plywood;
• post diameter: Ø14 cm;
• posts:
• 1 × 100 cm;
• 3 × 40 cm;
• 1 × 30 cm with ceiling tension mechanism;
• 1 × 15 cm;
• ceiling tension mechanism;
• choice of finish according to the options available on the product page.
• Posts wrapped with sisal rope.
• The cushions inside and on top of the cat houses are removable and washable.

The EX-S-12 floor-to-ceiling cat tree is stabilised with a ceiling tension mechanism. The overall height of the structure is adjusted to the room height provided when placing the order. Before purchasing, carefully measure the distance from the finished floor to the ceiling at the exact location where the cat tree will be installed.

After assembly, check that the cat tree is positioned vertically, tighten all connections securely and adjust the ceiling tension mechanism correctly. The finish can be selected from the options available on the product page.