Floor-to-Ceiling Tension Cat Tree EX-S-9

Floor-to-Ceiling Tension Cat Tree EX-S-9

The Floor-to-Ceiling Tension Cat Tree EX-S-9 is a tall model designed for installation between the floor and ceiling. Its vertical construction makes efficient use of the room height, creating several levels for climbing, scratching, resting and observing the surroundings.

Technical specifications – EX-S-9

• overall height: adjusted to the room height provided when placing the order;
• base: 50 × 70 cm, 45 mm thick, made of layered plywood;
• 2 × single hammock with layered plywood frame and removable washable cover;
• 1 × cat house: inner diameter Ø45 cm, height 35 cm;
• outer surface of the cat house covered with a white sisal mat;
• wax-treated cat house interior;
• removable cushions inside and on top of the cat house;
• cat house panels made of layered plywood;
• 1 × Rosette bed: inner diameter Ø45 cm;
• Rosette base made of lacquered layered plywood;
• Rosette rim covered with a white sisal mat;
• removable cushion inside the Rosette;
• post diameter: Ø14 cm;
• posts: 1 × 100 cm, 3 × 40 cm, 1 × 30 cm with ceiling tension mechanism, 1 × 15 cm;
• ceiling tension mechanism;
• choice of finish according to the options available on the product page.
• The cat house and rosette cushions are removable for washing.

The EX-S-9 floor-to-ceiling cat tree is stabilised with a ceiling tension mechanism. The overall height of the structure is adjusted to the room height provided when placing the order. Before purchasing, carefully measure the distance from the finished floor to the ceiling at the exact location where the cat tree will be installed.

After assembly, check that the cat tree is positioned vertically, tighten all connections securely and adjust the ceiling tension mechanism correctly. The finish can be selected from the options available on the product page.