Cat tree for cats EX-SZ-2A

Cat Tree EX-SZ-2A

The Cat Tree EX-SZ-2A combines a tall, multi-level structure for scratching, climbing and resting with an extensive wooden cabinet featuring a separate vestibule. With a total height of approximately 197 cm, the model provides several resting areas – a medium Cat Box, a medium Rosette and a single hammock – while three posts of different lengths offer generous scratching surfaces.

The lower section consists of a 75 × 50 cm cabinet divided into a main usable area and an 18 × 48 cm vestibule. The interior space intended for a bed or litter box measures 48 × 51 cm and has an internal height of 43.5 cm. The total external height of the cabinet, including the base and top panel, is 50 cm.

The vestibule makes the EX-SZ-2A particularly well suited as a cat tree with a litter box cabinet. After leaving the main compartment, the cat passes through a separate entrance area, creating a longer route out of the cabinet that may help retain some of the litter carried on its paws. It does not completely prevent litter from being scattered – the result also depends on the type of litter, the design of the litter box and the cat’s individual habits. Before ordering, the dimensions of the specific litter box should be compared with the available 48 × 51 × 43.5 cm space, leaving enough room for the cat to enter, turn around and leave comfortably.

Above the cabinet is the main cat tree structure. Three Ø 14 cm posts measuring 30 cm, 40 cm and 100 cm in length provide scratching surfaces at different heights. The longest 100 cm post allows the cat to stretch its entire body comfortably while scratching.

The EX-SZ-2A is equipped with a medium Cat Box with an internal diameter of Ø 45 cm, a medium Rosette with an internal diameter of Ø 45 cm and a single hammock. The enclosed Cat Box provides a sheltered resting place, the hammock creates a soft bed on another level, while the elevated Rosette offers a comfortable place for relaxing and observing the surroundings.

The cabinet is an integral part of the entire construction. The base measures 80 × 55 cm and the top panel measures 52 × 78 cm. In this category, the base and top panel are made of 36 mm thick plywood, while the remaining cabinet elements are made of 18 mm thick plywood. The substantial lower section provides broad support for the tall cat tree while also creating additional usable space in the home.

Technical specifications – EX-SZ-2A

• total height: approximately 197 cm;

• base: 80 × 55 cm;

• cabinet: 75 × 50 cm;

• external cabinet height including the base and top panel: 50 cm;

• internal cabinet height: 43.5 cm;

• vestibule: 18 × 48 cm;

• interior space for a bed or litter box: 48 × 51 cm;

• top panel: 52 × 78 cm;

• post diameter: Ø 14 cm;

• posts: 30 cm, 40 cm, 100 cm;

• 1 × medium Cat Box: internal diameter Ø 45 cm;

• 1 × medium Rosette: internal diameter Ø 45 cm;

• 1 × single hammock;

• cabinet with a separate vestibule;

• possible uses of the cabinet: space for a suitably sized litter box, hideaway, resting area or storage.

EX-SZ-2A is a cat tree with a litter box cabinet and vestibule that combines an extensive scratching and resting structure with a functional enclosed area at floor level. The Cat Box, hammock and Rosette provide several different resting options, while the vestibule increases the cabinet’s functionality when used as an enclosure for a cat litter box.