Floor-to-ceiling tension cat tree S-3

Floor-to-ceiling tension cat tree S-3

The Floor-to-ceiling tension cat tree S-3 is a tall upholstered structure that uses the space between the floor and ceiling. Its combination of eight scratching posts, a spacious cat box, two shelves and a tube creates a multi-level route for climbing, claw care, resting and observing the room.

The model is equipped with eight posts measuring 12 cm in diameter. The two longest posts measure 75 cm each and provide long vertical surfaces for scratching and full-body stretching. Four 37 cm posts and one 40 cm post connect the different levels and can also be used for scratching while climbing. The cat tree also includes one 30 cm post connected to the ceiling tension mechanism.

A cat box measuring 50 × 50 cm and 30 cm in height is positioned in the middle section. Its angled front gives it a distinctive shape, while the externally upholstered surface matches the remaining parts of the cat tree. The cat box provides a sheltered place for sleeping and peaceful rest at an elevated level.

When carpet upholstery is selected, the entrance to the cat box can be shaped like a cat’s head. This option is available exclusively with this upholstery version.

Two 50 × 50 cm shelves are positioned above the cat box. They form spacious levels for sitting, resting and moving between the different sections of the structure.

One of the shelves is combined with a tube measuring 40 cm in length and 30 cm in diameter. The tube creates a more sheltered space that can be used for resting, passing through or observing the surroundings from an elevated position.

The structure also includes a small step element positioned between the lower posts. It forms an additional part of the multi-level route leading from the base towards the cat box and upper shelves.

The 50 × 50 cm base is made of layered plywood. Its compact shape allows the room height to be used without requiring the floor space needed for a wide freestanding cat tree.

The upper section of the S-3 model is fitted with a tension mechanism that presses against the ceiling. The height of the cat tree is adjusted to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the ceiling tension mechanism adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour.

Technical specifications of the S-3 cat tree

• total height: adjusted to the room height provided when ordering;

• base: 50 × 50 cm, made of layered plywood;

• cat box: 50 × 50 cm, height 30 cm, with an angled front, upholstered on the outside;

• cat-head-shaped entrance available with carpet upholstery;

• 2 × shelf: 50 × 50 cm;

• tube: length 40 cm, diameter 30 cm;

• small step element;

• post diameter: Ø 12 cm;

• posts:

  • 2 × 75 cm;

  • 4 × 37 cm;

  • 1 × 40 cm;

  • 1 × 30 cm with tension mechanism;

• tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-3 is an upholstered floor-to-ceiling cat tree that combines long scratching surfaces with a spacious cat box, two shelves and a tube. Its vertical layout uses the room height and provides several levels for climbing, observing the surroundings and resting.