Floor-to-ceiling tension cat tree S-1C

Floor-to-ceiling tension cat tree S-1C

The Floor-to-ceiling tension cat tree S-1C is a tall, upholstered structure that uses the space between the floor and ceiling. Its arrangement of scratching posts, three single hammocks, a double hammock and a lair with a rosette creates a vertical route for scratching, climbing and resting at different heights.

The longest post measures 100 cm, providing the cat with a long surface for claw care and full-body stretching. Three 40 cm posts connect the different levels, while the 30 cm post is combined with the ceiling tension mechanism. All posts have a diameter of 14 cm.

The model includes three single hammocks positioned at different heights. One of them has a wooden frame and measures 50 × 60 cm. The soft hammocks create open resting areas and encourage the cat to use the different levels of the structure.

The cat tree also includes a double hammock, which provides two closely positioned resting surfaces. It increases the number of available places to lie down without significantly increasing the amount of space occupied by the structure.

A lair with a rosette measuring 45 cm in diameter is located in the lower section. Its raised edges create an open, partially sheltered bed that can be used for resting and observing the room.

The 50 × 65 cm base is made of layered plywood. Its elongated shape matches the arrangement of the two lower sections, while the vertical layout uses the height of the room without requiring the floor space of a wide freestanding cat tree.

The upper section of the S-1C model is fitted with a tension mechanism that presses against the ceiling. The height of the cat tree is adjusted to the room height selected when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the tension mechanism adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour.

Technical specifications of the S-1C cat tree

• total height: adjusted to the room height selected when ordering;

• base: 50 × 65 cm, made of layered plywood;

• 3 × single hammock;

• one single hammock with a wooden frame: 50 × 60 cm;

• double hammock;

• lair with a rosette: diameter 45 cm;

• post diameter: Ø 14 cm;

• posts:

  • 1 × 100 cm;

  • 3 × 40 cm;

  • 1 × 30 cm with tension mechanism;

• tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-1C is an upholstered floor-to-ceiling cat tree that combines long scratching surfaces with three single hammocks, a double hammock and a lair with a rosette. Its vertical layout makes use of the room height and provides several places for climbing and resting.