Floor-to-ceiling tension cat tree S-5

Floor-to-ceiling tension cat tree S-5

The Floor-to-ceiling tension cat tree S-5 is an extensive upholstered structure that uses the space between the floor and ceiling. Its combination of numerous scratching posts, a cat box, two shelves, a hammock, a tube, a swing and a play rope creates a multi-level route for scratching, climbing, resting and observing the room.

The model is equipped with nine posts measuring 12 cm in diameter. Three 60 cm posts provide long vertical surfaces for claw care and full-body stretching. Four 40 cm posts and one 30 cm post connect the different levels, creating several scratching surfaces that can also be used while climbing. The upper 20 cm post is connected to the ceiling tension mechanism.

The lower section includes a cat box measuring 40 × 60 cm and approximately 35 cm in height. Its outer surface is upholstered. The cat box provides a sheltered place for sleeping and peaceful rest, while its roof also creates the first spacious level of the structure.

The 40 × 55 cm shelf with an opening makes it easier for the cat to move between levels. A 25 × 25 cm swing is suspended beneath the shelf, adding variety to the structure and providing an additional place for playing or short periods of rest.

The second 40 × 55 cm shelf is combined with a tube measuring 40 cm in length and 30 cm in diameter. The tube creates a more sheltered space that can be used for resting, passing through or observing the surroundings from an elevated position. A play rope is also attached to the shelf.

The single hammock measures 50 × 62 cm and provides a soft, open place for resting. It is positioned in the upper section of the cat tree, allowing the cat to relax and observe the room from a greater height.

The 50 × 80 cm base is made of layered plywood. Its elongated shape corresponds to the multi-column arrangement and the distribution of the different resting elements.

The upper section of the S-5 model is fitted with a tension mechanism that presses against the ceiling. The height of the cat tree is adjusted to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the ceiling tension mechanism adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour.

Technical specifications of the S-5 cat tree

• total height: adjusted to the room height provided when ordering;

• base: 50 × 80 cm, made of layered plywood;

• cat box: 40 × 60 cm, approximately 35 cm high, upholstered on the outside;

• shelf with an opening: 40 × 55 cm;

• swing: 25 × 25 cm;

• shelf with a tube: 40 × 55 cm;

• tube: length 40 cm, diameter 30 cm;

• single hammock: 50 × 62 cm;

• play rope;

• post diameter: Ø 12 cm;

• posts:

  • 3 × 60 cm;

  • 4 × 40 cm;

  • 1 × 30 cm;

  • 1 × 20 cm with tension mechanism;

• tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-5 is an upholstered floor-to-ceiling cat tree that combines numerous scratching surfaces with a cat box, hammock, tube, swing and shelves. Its multi-level layout uses the room height and provides varied places for climbing, playing and resting.