Floor-to-ceiling tension cat tree S-1

Floor-to-ceiling tension cat tree S-1

The Floor-to-ceiling tension cat tree S-1 is a tall, upholstered structure that uses the space between the floor and ceiling. Its arrangement of four scratching posts and three single hammocks creates a vertical route for scratching, climbing and resting at different heights.

The longest post measures 90 cm, providing the cat with a long surface for claw care and full-body stretching. Two 45 cm posts connect the different levels, while the 30 cm post is combined with the ceiling tension mechanism. All posts have a diameter of 14 cm.

The model is equipped with three single hammocks with frames, positioned one above another. Their soft surfaces adapt to the cat’s body and provide open places for resting and observing the room from different heights. The gradual arrangement of the hammocks also encourages climbing and active use of the entire structure.

The 50 × 50 cm base is made of layered plywood. Its compact shape allows the cat tree to use the height of the room without requiring the floor space of a wide freestanding structure.

The upper section of the S-1 model is fitted with a tension mechanism that presses against the ceiling. The height of the cat tree is adjusted to the room height provided when placing the order. Before ordering, the distance between the finished floor and ceiling must be measured carefully in the exact installation location.

After assembly, the structure should be checked to ensure that it is vertical. All connections must be tightened and the ceiling tension mechanism adjusted correctly. The model can be configured by selecting the available upholstery type and rope colour.

Technical specifications of the S-1 cat tree

• total height: adjusted to the room height provided when ordering;

• base: 50 × 50 cm, made of layered plywood;

• 3 × single hammock with frame;

• post diameter: Ø 14 cm;

• posts:

  • 1 × 90 cm;

  • 2 × 45 cm;

  • 1 × 30 cm with tension mechanism;

• tension mechanism for ceiling installation;

• choice of upholstery type and rope colour.

S-1 is an upholstered floor-to-ceiling cat tree that combines long scratching surfaces with three hammocks positioned at different heights. Its vertical structure provides several places for climbing, observing the surroundings and resting.